CLI Guide

Parameters Description
source-address-
validation
Display the interfaces configured with IP Source Guard.
discard-counters
(OPTIONAL) Display the number of dropped packets.
interface interface
(OPTIONAL) Specifies an interface to show the discard
counters.
Enter any of the following keywords and the interface
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword
twentyFiveGigE then the slot/port/subport
information.
• For a 50-Gigabit Ethernet interface, enter the keyword
fiftyGigE then the slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword
hundredGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel
then a number.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0)
Added the discard-counters, interface keywords, and
the interface variable.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Dynamic Host Configuration Protocol (DHCP)
581