CLI Guide

RX - Debug Counter 1 0
RX - Debug Counter 2 0
<output truncated for brevity>
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow stack-unit id port-set number
[counters | pipeline pipeline-number]
Parameters
stack-unit id Enter the keywords stack-unit to select a stack member
ID.
port-set number
[counters |
pipeline pipeline-
number]
Enter the keywords port-set with a port-pipe number.
(OPTIONAL) Enter the keyword counters for the specified
port-pipe.
Enter the keyword pipeline to display entries specific to a
pipeline.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Example
Dell# show hardware system-flow stack-unit 1 port-set 0 counters
-------------------------------------------------------------------------------
EntryId Description #HITS for Pipeline: 0
-------------------------------------------------------------------------------
3067 STP BPDU Redirects 0
3065 LLDP BPDU Redirects 0
3063 LACP traffic Redirects 0
3062 GVRP traffic Redirects 0
3061 ARP Reply Redirects 0
3060 802.1x frames Redirects 0
3059 VRRP frames Redirects 0
3058 IPv6VRRP frames Redirects 0
3056 OSPFv3 Multicast [33:33:00:00:00:06] 0
3057 OSPFv3 Multicast [33:33:00:00:00:05] 0
3054 GRAT ARP 0
546
Debugging and Diagnostics