CLI Guide

• For a 25-Gigabit Ethernet interface, enter the keyword
twentyFiveGigE then the slot/port/subport
information.
• For a 50-Gigabit Ethernet interface, enter the keyword
fiftyGigE then the slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword
hundredGigE then the slot/port information.
queue
Enter the keyword queue followed by all for displaying
details of all queues, ucast queue-id or all for displaying
Unicast queue details, and
mcast queue-id or all for
displaying Multicast queue details.
priority-group Enter the keyword priority-group followed by id for
specific priority-group or keyword all.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, Z9500.
Usage Information <Interface><slot/port>-Queue ucast/mcast — Displays the total unicast/
multicast buffer usage on per-port per-queue basis.
Example displaying
egress queue-level
snapshot for both
unicast and
multicast packets
for the specific
interface
Dell# show hardware buffer-stats-snapshot resource interface
hundredGigE 1/10 queue all
Stack-unit 1 unit: 0 port: 34 (interface Hu 1/10)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
UCAST 0 0
UCAST 1 0
UCAST 2 0
UCAST 3 0
UCAST 4 0
UCAST 5 0
UCAST 6 0
UCAST 7 0
UCAST 8 0
UCAST 9 0
MCAST 0 0
540
Debugging and Diagnostics