CLI Guide

Parameters
interface interface
type interface-
number
Enter the keyword interface followed by the keyword
interface type and interface number to display the
buffer details of a particular interface.
Enter any of the following keywords and slot/port[/subport]
or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport
information.
• For a 25-Gigabit Ethernet interface, enter the keyword
twentyFiveGigE then the slot/port/subport
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port/subport information.
• For a 50-Gigabit Ethernet interface, enter the keyword
fiftyGigE then the slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword
hundredGigE then the slot/port information.
queue Enter the keyword queue followed by id for specific queue
or keyword all.
priority-group Identifier of the priority group in the range of 0 to 7.
Enter the keyword priority-group followed by id for
specific priority group or keyword all.
buffer-info To display total buffer information for the port interface,
enter the keywords buffer-info. To display a queue
range, enter 0 to 19 for a specific queue or all.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Removed the keyword port and added the keywords
interface, and the variable interface .
9.7(0.0) Introduced on the S6000-ON.
Version 9.3(0.0) Introduced on the S6000 platform.
Usage Information The following table describes the fields in the output of the show command:
538
Debugging and Diagnostics