CLI Guide

cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to
display the data plane statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to display the
counters of i2c devices.
cpu management
statistics
Enter the keywords cpu management statistics to
display the counters of the management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to
display the Management plane input/output counter
statistics of the pseudo party bus interface.
cpu sata-interface
statistics
Enter the keywords cpu sata-interface statistics
to display the sata interface error counter statistics.
drops [unit unit-
number]
Enter the keyword drops to display internal drops on the
selected stack member. Enter the optional keyword unit
unit-number
to display the internal drop counters of the
specified port pipe.
fpga register Enter the keyword to display the register value of the fpga
register.
unit unit-number
{counters | ipmc-
replication |
details | port-stats
[detail] | register |
table-dump table-
name}
Enter the keyword unit then a number and then enter one
of the keywords to troubleshoot errors on the selected
port-pipe and to give status on why a port is not coming up
to register level.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Replaced the keyword port with interface.
9.7(0.0) Introduced on the S6000-ON.
9.2(0.2) Modified the drops keyword range, unit keyword range
and added the buffer and cpu management
statistics
options.
532
Debugging and Diagnostics