CLI Guide

Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | cpu {data-plane
statistics | i2c statistics | management statistics | party-bus
statistics | sata-interface statistics} | unit number counters
| stack-port stack-port-number}
Parameters
stack-unit id Enter the keywords stack-unit then a number to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data. The
range is from 1 to 6.
counters Enter the keyword counters to clear the counters on the
selected stack member.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to
clear the data plane statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to clear the i2c
devices statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear
the management statistics.
cpu sata-interface
statistics
Enter the keywords cpu sata-interface statistics
to clear the sata interface statistics.
stack-port Enter the keywords stack-port then the port number of
the stacking port to clear the statistics of the particular
stacking port.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
526
Debugging and Diagnostics