CLI Guide

Example
Dell#show diag information
Diag information:
Diag software image version:
9.8(1.0)
-------------------------------------------------------------------
stack-unit Member 1: No Unit diags executed yet (stack-unit
not Offline).
-------------------------------------------------------------------
Dell#show diag testcase stack-unit 1
**************************** Z9100 Diagnostics Test
*************************
Test ID Test Description Test Level
------- ---------------- ----------
1 SMARTFUSIONFPGAACCESSTEST Level0
2 CPLDACCESSTEST Level0
3 CPUTYPEDETECTTEST Level0
4 CPUSDRAMPRESENCETEST Level0
5 CPUSDRAMSIZETEST Level0
6 CPLDBOARDTYPETEST Level0
7 I2CACCESSTEST Level0
8 PSUPRESENCETEST Level0
9 PSUSOURCETYPETEST Level0
10 PSUSTATUSMONITORTEST Level0
11 PSUFANSPEEDMONITORTEST Level0
12 PSUFANSTATUSMONITORTEST Level0
13 PSUFANAIRFLOWTYPETEST Level0
14 FANTRAYPRESENCETEST Level0
15 FANSTATUSMONITORTEST Level0
16 FANAIRFLOWTYPETEST Level0
17 RTCPRESENCETEST Level0
18 SSDPRESENCETEST Level0
[output truncated]
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced the verbose option.
7.7.1.0 Introduced on the S-Series.
Debugging and Diagnostics
525