CLI Guide

Field Description
PFC TLV Statistics:
Pause Rx pkts
Number of PFC pause frames received.
Example
(Summary)
Dell(conf)#$ interfaces tengigabitethernet 1/3/1 pfc buffer-threshold
Interface TenGigabitEthernet 1/3/1
Interface Queue# Lossless Buffer-size Pause-threshold Resume-offset Shared Threshold
(KB) (KB) (KB) Weight
---------------------------------------------------------------------------------------------
Te 1/3/1 Q0 NO - - - -
Te 1/3/1 Q1 NO - - - -
Te 1/3/1 Q2 NO - - - -
Te 1/3/1 Q3 NO - - - -
Te 1/3/1 Q4 NO - - - -
Te 1/3/1 Q5 NO - - - -
Te 1/3/1 Q6 NO - - - -
Te 1/3/1 Q7 NO - - - -
show interface pfc statistics
Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
Syntax
show interface port-type pfc statistics
Parameters
port-type Enter the port type and the interface information.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Enabled to display the command output even without enabling DCB.
9.9(0.0) Added support to display the interface configurations corresponding to a
range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
496
Data Center Bridging (DCB)