CLI Guide

Dell Networking OS accepts confederation EBGP peers without a LOCAL_PREF
attribute. The software sends AS_CONFED_SET and accepts AS_CONFED_SET and
AS_CONF_SEQ.
If a local-as is configured, BGP does not allow for the configuration of BGP
confederation. Similarly, if BGP confederation is configured, then BGP does not
allow the configuration of local-as.
If the neighbor is an eBGP neighbor, then BGP performs a check on the first AS
number. In this scenario, it is mandatory that the first sequence in the AS path is of
type AS_SEQUENCE or AS_CONFED_SEQUENCE (in the case of confederations). If
the first entry appears as an AS_CONFED_SET and the neighbor is not in the local
AS, then this is strictly a problem with the neighbor node.
This command automatically restarts the BGP instance for the configuration to
take effect.
Related
Commands
• bgp four-octet-as-support — enable 4-byte support for the BGP process.
bgp confederation peers
Specify the autonomous systems (ASs) that belong to the BGP confederation.
Syntax
bgp confederation peers as-number [...as-number]
To return to the default, use the no bgp confederation peers command.
Parameters
as-number Enter the AS number. The range is from 0 to 65535 (2 byte),
from 1 to 4294967295 (4 byte), or from 0.1 to 65535.65535
(dotted format).
...as-number (OPTIONAL) Enter up to 16 confederation numbers. The
range is from 0 to 65535 (2 byte), from 1 to 4294967295 (4
byte), or from 0.1 to 65535.65535 (dotted format).
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Border Gateway Protocol
359