CLI Guide

• seq — configure a MAC address filter with a specified sequence number.
mac access-list extended
Name a new or existing extended MAC access control list (extended MAC ACL).
Syntax
mac access-list extended access-list-name [cpu-qos]
To delete a MAC access list, use the no mac access-list extended access-
list-name command.
Parameters
access-list-name Enter a text string as the MAC access list name, up to 140
characters.
cpu-qos Enter the keywords cpu-qos to assign this ACL to control
plane traffic only (CoPP).
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
246
Access Control Lists (ACL)