CLI Guide

Te 1/3/1 254 254 Y Master 200.200.200.200 200.200.200.204
200.200.200.205
Dell>
Usage Information The following describes the show vrrp command.
Item Description
TenGigabitEthern
et 1/3...
Displays the interface, VRRP group ID, and network address. If the
interface is not sending VRRP packets, 0.0.0.0 appears as the network
address.
State: master... Displays the interface’s state:
• Na/If (not available)
• master (MASTER virtual router)
• backup (BACKUP virtual router)
Also displays the interface’s priority and IP address of the MASTER.
Hold Down:... Displays additional VRRP configuration information:
• Hold Down displays the hold down timer interval in seconds.
• Preempt displays TRUE if preempt is configured and FALSE if
preempt is not configured.
• AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... Displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements received on
the interface.
• Adv sent displays the number of VRRP advertisements sent on the
interface.
• Gratuitous ARP sent displays the number of gratuitous ARPs sent.
Virtual MAC
address
Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the interface’s VRRP router.
Authentication:... States whether authentication is configured for the VRRP group. If it is
configured, this lists the authentication type and password.
Tracking states.. Displays if the track command is configured on an interface. Also
displays the following information about the tracked interface:
• Dn or Up states whether the interface is down or up.
• The interface type slot/port information.
Example
Dell> show vrrp
------------------
TenGigabitEthernet 1/1/3, VRID: 1, Net: 10.1.1.253
VRF: 0 default
State: Master, Priority: 105, Master: 10.1.1.253 (local)
1734
Virtual Router Redundancy Protocol (VRRP)