CLI Guide

Version Description
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information The following describes the show vrrp brief command.
Item Description
Interface Lists the interface type, slot, and port of the configured VRRP group.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If you configured
the track command to track that interface and you disable the
interface, the cost is subtracted from the priority value assigned to the
interface.
Pre States whether preempt is enabled on the interface:
• Y = Preempt is enabled.
• N = Preempt is not enabled.
State Displays the operational state of the interface using one of the
following:
• NA/IF (the interface is not available).
• MASTER (the interface associated with the MASTER router).
• BACKUP (the interface associated with the BACKUP router).
Master addr Displays the IP address of the MASTER router.
Virtual addr(s) Displays the virtual IP addresses of the VRRP routers associated with
the interface.
Example (Brief)
Dell> Interface Grp Pri Pre State Master addr Virtual addr(s)
Description------------------------------------------------------------
Te 1/3/1 1 100 Y Master 200.200.200.200 200.200.200.201
Te 1/3/1 2 100 Y Master 200.200.200.200 200.200.200.202
200.200.200.203 Description
Te 1/3/1 3 100 Y Master 1.1.1.1 1.1.1.2
Te 1/3/1 4 100 Y Master 200.200.200.200 200.200.200.206
200.200.200.207 ... short desc
Virtual Router Redundancy Protocol (VRRP)
1733