CLI Guide

vlan-range
Enter the VLAN IDs that you want to exclude from the proxy
gateway. The value can be a single VLAN ID, comma-
separated VLAN IDs, a range of VLAN IDs, or a combination.
For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW LLDP
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You must configure the VLT port channel interface which is connecting to the
remote VLT domain as peer-domain-link. You can also configure the VLANs you
want to exclude from the VLT proxy gateway.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain)#proxy-gateway lldp
Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-
channel 20 exclude-vlan 3
proxy-gateway peer-timeout
Enables the VLT node to timeout the transmission of the peer MAC address when the VLT peer is down.
Syntax
[no] peer-timeout value
Parameters
value Enter the timeout value (in seconds). The range is from 1 to
65535. The default is infinity.
VLT Proxy Gateway
1695