CLI Guide

value can be a single VLAN ID, comma-separated VLAN IDs,
a range of VLAN IDs, or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can configure the MAC address of a VLT peer in a remote VLT domain to
associate with the static VLT proxy gateway and exclude a VLAN, or a range of
VLANs, from proxy routing.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)# remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
Dell(conf-vlt-domain-proxy-gw-static)#
peer-domain-link port-channel exclude-vlan
Configure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or
configure the VLANs you want to exclude from VLT proxy gateway.
Syntax
[no] peer-domain-link port-channel interface-identifier
exclude-vlan vlan-range
Parameters
port-channel Configure the proxy-gateway interface port-channel.
interface-
identifier
Enter the interface type.
1694
VLT Proxy Gateway