CLI Guide

After the limit is reached, additional dynamic routes are not
allowed.
warning-only When you use the warning-only option, when the
maximum number of dynamic routes reaches the limit, a
warning message appears.
After the limit is reached, additional dynamic routes are still
allowed.
Defaults No limit is set on the maximum number of dynamic routes for a VRF.
Command Modes
CONFIGURATION-VRF
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4(0.0) Introduced on the S–Series.
Usage Information
If you do not specify the maximum route limit for a VRF, the VRF has unlimited
space that extends to the maximum number of entries allowed for the system. This
command does not apply to default and management VRFs.
show ip vrf
Displays information corresponding to the VRFs that you configure in the system.
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf then the name of the VRF to display
information corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Virtual Routing and Forwarding (VRF)
1689