CLI Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series.
ip vrf forwarding
Attach an interface to a VRF.
Syntax
ip vrf forwarding {vrf-name | management}
To delete an interface associated with a configured VRF, use the no ip vrf
forwarding {vrf-name | management} command.
Parameters
vrf-name Enter name of the VRF that you want to associate the
interface to.
management Enter the keyword management to associate an interface to
the management VRF.
Defaults none
Command Modes INTERFACE-CONFIG
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage Information
You can attach an interface to either a nondefault VRF or a management VRF.
To assign a port-back to a default VRF, remove the VRF association from the
interface. You can use this only if there is no IP address configured on the interface.
Virtual Routing and Forwarding (VRF)
1679