CLI Guide

Version Description

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the E-Series. C-Series and S-Series accept

both bytes of the 2-byte S-Tag TPID.

8.2.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the C-Series and S-Series.

E-Series original

Command

Usage Information

For specific interoperability limitations regarding the S-Tag TPID, see the Dell

Networking OS Configuration Guide.

The four characters you may enter are shown in the following table.

Number Resulting TPID

1 0x0001

10 0x0010

81 0x0081

8100 0x8100

Commands

• portmode hybrid — sets a port (physical ports only) to accept both tagged and

untagged frames. A port configured this way is identified as a hybrid port in

report displays.

• vlan-stack trunk — specifies a Layer 2 port or port channel as a trunk port to the

Stackable VLAN network.

vlan-stack trunk

Specify a Layer 2 port or port channel as a trunk port to the stackable VLAN network.

Syntax

vlan-stack trunk

To remove a trunk port designation from the selected interface, use the no vlan-

stack trunk command.

Defaults Not configured.

Command Modes INTERFACE

VLAN Stacking

1673