CLI Guide

Field Description
st Displays the peer’s stratum, that is, the number of hops
away from the external time source. A 16 in this column
means the NTP peer cannot reach the time source.
when Displays the last time the switch received an NTP packet.
poll Displays the polling interval (in seconds).
reach Displays the reachability to the peer (in octal bitstream).
delay Displays the time interval or delay for a packet to complete
a round-trip to the NTP time source (in milliseconds).
offset Displays the relative time of the NTP peer’s clock to the
switch clock (in milliseconds).
disp Displays the dispersion.
Example
Dell# show ntp associations
remote ref clock st when poll reach delay offset disp
=============================================================
10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9
104.16
172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
* master (synced), # master (unsynced), + selected, - candidate
Dell#
Related
Commands
• show ntp status — displays the current NTP status.
show ntp vrf associations
Displays the NTP servers configured for the VRF instance <vrf-name>.
Syntax show ntp [vrf] <vrf-name> associations.
Command Modes EXECEXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Added support for VRF.
1650
System Time and Date