CLI Guide

Dell# show tech-support stack-unit 1 | save flash://LauraSave
Start saving show command report .......
Dell#
Dell# dir
Directory of flash:
1 drw- 16384 Jan 01 1980 00:00:00 +00:00 .
2 drwx 1536 Jul 13 1996 02:38:06 +00:00 ..
3 d--- 512 Nov 20 2007 15:46:44 +00:00 ADMIN_DIR
Dell#
Example
Dell#show tech-support stack-unit 1
----------------------------------- show version -------------------------------
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 9-8(1-270)
Copyright (c) 1999-2015 by Dell Inc. All Rights Reserved.
Build Time: Sun Sep 20 04:00:00 2015
Build Path: /build/build09/SW/SRC
Dell Networking OS uptime is 40 minute(s)
System image file is "system://B"
System Type: Z9100-ON
Control Processor: Intel Rangeley with 3 Gbytes (3177185280 bytes) of memory, core(s) 2.
8G bytes of boot flash memory.
1 34-port TE/TF/FO/FI/HU G (Z9100-ON)
2 Ten GigabitEthernet/IEEE 802.3 interface(s)
112 Twenty Five GigabitEthernet/IEEE 802.3 interface(s)
4 Hundred GigabitEthernet/IEEE 802.3 interface(s)
------------------------------------ show clock -------------------------------
21:44:30.965 UTC Sat Sep 19 2015
----------------------------------- show running-config ------------------------
Current Configuration ...
! Version 9-8(1-270)
! Last configuration change at Sat Sep 19 21:08:22 2015 by default
!
boot system stack-unit 1 primary system: B:
boot system stack-unit 1 secondary system: B:
boot system stack-unit 1 default system: A:
!
redundancy auto-synchronize full
!
hardware watchdog stack-unit 1
!
hostname Dell
!
stack-unit 1 provision Z9100-ON
!
Related
Commands
ssh-peer-stack-unit
Open an SSH connection to the peer stack-unit.
Syntax
ssh-peer-stack-unit [-l username]
Parameters
-l username (OPTIONAL) Enter the keyword -l then your user name.
The default is the user name associated with the terminal.
Defaults Not configured.
Command Modes
• EXEC
Control and Monitoring
155