CLI Guide

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and

MXL.

Usage Information

By default, access to commands are determined by the user’s role (if defined) or by

the user’s privilege level. If the aaa authorization role-only command is

enabled, then only the user’s role is used.

Before you enable role-based only AAA authorization:

1. Locally define a system administrator user role.This will give you access to

authentication servers is not available.

2. Configure login authentication on the console. This ensures that all users are

properly identified through authentication no matter the access point

3. Specify an authentication method (RADIUS, TACACS+, or Local).

4. Specify authorization method (RADIUS, TACACS+ or Local).

5. Verify the configuration has been applied to the console or VTY line.

Commands

role

Changes command permissions for roles.

Syntax role mode { { { addrole | deleterole } role-name } | reset } command

To delete access to a command, use the no role mode role-name

Parameters

mode

Enter one of the following keywords as the mode for which

you are controlling access:

configure for CONFIGURATION mode

exec for EXEC mode

Security

1521