CLI Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000.
Usage Information
You can configure all the data queues. You can configure queues 0-7.
The following table describes the mapping between the threshold weight of the
shared buffer on the queue. It also shows the percentage of the available shared
buffer used by the queues for each of the corresponding threshold weights of the
shared buffer:
shared-
threshold-
weight on the
queue
% of available shared buffer that can be
consumed by the queue
0 No dynamic sharing; shared buffer = 0.
1 0.77%
2 1.54%
3 3.03%
4 5.88%
5 11.11%
6 20%
7 33.33%
8 50%
9 66.67%
10 80%
11 88.89%
Example
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
Syntax
test cam-usage service-policy input policy-map stack-unit
{[number port-set portpipe number] | [all]}
Quality of Service (QoS)
1341