CLI Guide

• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Example
service-class buffer shared-threshold-weight
Create a service class and associate the threshold weight of the shared buffer with each of the queues
per port in the egress direction.
Syntax
[No] Service-class buffer shared-threshold-weight {[queue0
number] || [queue1 number] || [queue2 number] || [queue3
number] || [queue4 number] || [queue5 number] || [queue6
number] || [queue7 number]}
Parameters
buffer Define the shared buffer settings
shared-threshold-
weight
Specify the weight of a queue for the shared buffer space
queue 0 to queue
7
To apply the shared-threshold weight, specify the queue
number
number Enter a weight for the queue on the shared buffer as a
number in the range of 1 to 11.
Default The default threshold weight on the shared buffer for each queue is 9. Therefore,
each queue can consume up to 66.67 percent of available shared buffer by default.
Command Modes INTERFACE mode
1340
Quality of Service (QoS)