CLI Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
Dell#show alarms
-- Minor Alarms --
Alarm Type Duration
---------------------------------------------------------------------------
-- Major Alarms --
Alarm Type Duration
---------------------------------------------------------------------------
PEM 2 in unit 1 down 13 min, 36 sec
Fan 1 in PSU 2 of Unit 1 is down or removed 13 min, 34 sec
Dell#
show cpu-traffic-stats
View the CPU traffic statistics.
Syntax
show cpu-traffic-stats [port number | all | cp ]
Parameters
port number (OPTIONAL) Enter the port number to display traffic
statistics on that port only. The range is from 1 to 1568.
all (OPTIONAL) Enter the keyword all to display traffic
statistics on all the interfaces receiving traffic, sorted based
on the traffic.
cp (OPTIONAL) Enter the keyword cp to display traffic statistics
on the specified CPU.
Defaults all
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Control and Monitoring
131