CLI Guide

Command History
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.7(0.0) Introduced on the S6000-ON.
9.3.0.0 Introduced on the S6000 platform
Usage Information Only the software-based trigger for retrieving and calculating the snapshots of the
statistical counters of the buffer space is supported. Collection of snapshots of
buffer statistical counters based on hardware threshold settings is not supported,
which can be used to specify the type of hardware threshold and the threshold
profile templates.
Example
Dell(conf)#buffer-stats-snapshot
Dell(conf-buffer-stats-snapshot)#?
disable Disable buffer-stats-snapshot globally
end Exit from configuration mode
exit Exit from buffer-stats-snapshot
configuration mode
no Negate a command or set its defaults
show Show buffer-stats-snapshot
configuration
Dell(conf-buffer-stats-snapshot)#no disable
Dell(conf-buffer-stats-snapshot)#show configuration
!
buffer-stats-snapshot
no disable
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality-of-
service policies to each class.
Syntax
class-map {match-all | match-any} class-map-name [cpu-qos]
[layer2]
Parameters
match-all Determines how packets are evaluated when multiple
match criteria exist. Enter the keywords match-all to
determine that the packets must meet all the match criteria
in order to be a member of the class.
match-any Determines how packets are evaluated when multiple
match criteria exist. Enter the keywords match-any to
determine that the packets must meet at least one of the
match criteria in order to be a member of the class.
class-map-name Enter a name of the class for the class map in a character
format (32 character maximum).
cpu-qos Enter the keyword cpu-qos to assign this Class Map to
control plane traffic only (CoPP).
1306
Quality of Service (QoS)