CLI Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced.
Usage Information By default, when rate policing and shaping, the system does not include the
Preamble, SFD, or the IFG fields. These fields are overhead; only the fields from
MAC destination address to the CRC are used for forwarding and are included in
these rate metering calculations.
service-class bandwidth-percentage
Specify a minimum bandwidth for queues.
Syntax
service-class bandwidth-percentage queue0 number queue1 number
queue2 number queue3 number queue4 number queue5 number queue6
number queue7 number
Parameters
number Enter the bandwidth-weight, as a percentage.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Usage Information Guarantee a minimum bandwidth to different queues globally using the service-
class bandwidth-percentage command from CONFIGURATION mode. The
command is applied in the same way as the
bandwidth-percentage command
in an output QoS policy. The bandwidth-percentage command in QOS-
POLICY-OUT mode supersedes the
service-class bandwidth-percentage
command.
Quality of Service (QoS)
1297