CLI Guide

Field Description
Query Intvl Displays the query interval for Router Query messages on
that interface (configured with ip pim query-interval
command).
DR Prio Displays the Designated Router priority value configured on
the interface (use the ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that
interface.
The show ip pim interface command does not display information
corresponding to the loop-back interfaces.
Example
Dell# show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prio
165.87.34.5 Te 1/10/1 v2/S 0 30 1
165.87.34.5
10.1.1.2 Vl 10 v2/S 1 30 1
10.1.1.2
20.1.1.5 Vl 20 v2/S 1 30 1
20.1.1.5
165.87.31.200 Vl 30 v2/S 1 30 1
165.87.31.201
Dell#
show ip pim neighbor
View PIM neighbors.
Syntax
show ip pim [vrf vrf-name] neighbor
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name
of the VRF to configure this setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
1252
PIM-Sparse Mode (PIM-SM)