CLI Guide

destination-port-
range
Enter the keywords destination-port-range then the
range of the start port to end port to be matched in the ACL
rule in the ICAP rule.
Defaults none
Command Modes REDIRECT-LIST
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for the track-id on the S4810, S4820T,
S6000, S6000-ON, and Z9000.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
show cam pbr
Display the PBR CAM content.
Syntax
show cam pbr {interface interface | stack—unit slot-number
port-set number [pipeline number]} [summary]
Parameters
interface interface Enter the keyword interface then the name of the
interface.
stack–unit
number
Enter the keyword stack-unit then the slot number.
port-set number Enter the keywords port-set then the port-pipe number.
summary Enter the keyword summary to view only the total number
of CAM entries.
pipeline number Enter the keyword pipeline and a number to which the
interface belongs. The range is from 0 to 3.
Defaults none
Command Modes EXEC
Policy-based Routing (PBR)
1229