CLI Guide

Usage Information
You can configure an arbitrary value in the IP address for each router. However,
each router ID must be unique.
If this command is used on an OSPFv3 process that is already active (has
neighbors), all the neighbor adjacencies are brought down immediately and new
sessions are initiated with the new router ID.
Related
Commands
• clear ipv6 ospf process – reset an OSPFv3 router process.
show crypto ipsec policy
Display the configuration of IPsec authentication and encryption policies.
Syntax show crypto ipsec policy [name name]
Parameters
name name (OPTIONAL) Displays configuration details about a specified
policy.
Defaults No default behavior or values.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.0 Introduced on the E-Series.
8.3.19.0 Introduced on the S4820T.
Usage Information
The show crypto ipsec policy command output displays the AH and ESP
parameters configured in IPsec security policies, including the SPI number, keys, and
algorithms used.
When configured in a helper-reject role, an OSPFv3 router ignores the Grace LSAs that it
receives from a restarting OSPFv3 neighbor.
1210
Open Shortest Path First (OSPFv2 and OSPFv3)