CLI Guide

To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [route-map map-name]
[tag tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1
to 65535.
metric metric-
value
(OPTIONAL) Enter the keyword metric then the metric-
value number. The range is from 0 to16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Defaults None
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.3 Added Route Map for BGP Redistribution to OSPF.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added the keyword default.
Open Shortest Path First (OSPFv2 and OSPFv3)
1137