CLI Guide

To return to the default bandwidth or to assign cost based on the interface type,
use the no auto-cost [reference-bandwidth] command.
Parameters
ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per
second. The range is from 1 to 4294967. The default is 100
megabits per second.
Defaults 100 megabits per second.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
clear ip ospf
Clear all OSPF routing tables.
Syntax
clear ip ospf process-id [vrf vrf-name] [process]
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
vrf vrf-name Enter the keyword vrf and then the name of the VRF to
clear all OSPF routing tables corresponding to that VRF.
Open Shortest Path First (OSPFv2 and OSPFv3)
1099