CLI Guide

track 4 interface TenGigabitEthernet 1/2/1 ip routing
track 5 ip route 192.168.0.0/24 reachability vrf red
track resolution ip route isis 20
track resolution ip route ospf 10
Example (Object-
id)
Dell# show running-config track 300
track 300 ip route 10.0.0.0/8 metric threshold
delay down 3
delay up 5
threshold metric up 100
Related
Commands
• show track – display information about tracked objects, including
configuration, current state, and clients which track the object.
• track interface ip routing – configure object tracking on the routing status of an
IPv4 Layer 3 interface.
• track interface line-protocol – configure object tracking on the line-protocol
state of a Layer 2 interface.
• track ip route metric threshold – configure object tracking on the threshold of
an IPv4 route metric.
• track ip route reachability – configure object tracking on the reachability of an
IPv4 route.
show track
Display information about tracked objects, including configuration, current tracked state (UP or DOWN),
and the clients which are tracking an object.
Syntax
show track [object-id [brief] | interface [brief] [vrf vrf-
name] | ip route [brief] [vrf vrf-name] | resolution | vrf vrf-
name [brief] | brief]
Parameters
object-id (OPTIONAL) Display information on the specified tracked
object. The range is 1 to 500.
interface (OPTIONAL) Display information on all tracked interfaces
(Layer 2 and IPv4 Layer 3).
ip route (OPTIONAL) Display information on all tracked IPv4 routes.
resolution (OPTIONAL) Display information on the configured
resolution values used to scale protocol-specific route
metrics. The range is 0 to 255.
brief (OPTIONAL) Display a single line summary of the tracking
information for a specified object, object type, or all tracked
objects.
vrf vrf-name (OPTIONAL) E-Series only: Display information on only the
tracked objects that are members of the specified VRF
instance. The maximum is 32 characters. If you do not enter
Object Tracking
1075