CLI Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch Z9100-ON

1061

ipv6–mac-

access-list name

Enter the keywords ipv6–mac-access-list then the

mac-access-list name. The mac-access-list name allows a

maximum of 140 characters.

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and

Z9000 switches.

Commands

• ipv6 nd ra-guard enable — configure the RA guard related commands.

• ipv6 nd raguard policy policy-name — define the RA guard policy name and

enter the RA guard policy configuration mode.

mtu

Enable the verification of the configured maximum transmission unit (MTU) value in the received RA

packets.

Syntax

mtu value

To reset the MTU value, use the no mtu value command.

Parameters

value Enter the maximum transmission unit value in bytes. The

range is from 1,280 to 11,982 bytes.

Defaults 0