Reference Guide

Type Application Description
2 Voice Signaling Specify this application type only if voice control
packets use a separate network policy than voice
data.
3 Guest Voice Specify this application type for a separate
limited voice service for guest users with their
own IP telephony handsets and other appliances
supporting interactive voice services.
4 Guest Voice Signaling Specify this application type only if guest voice
control packets use a separate network policy
than voice data.
5 Softphone Voice Specify this application type only if guest voice
control packets use a separate network policy
than voice data.
6 Video Conferencing Specify this application type for dedicated video
conferencing and other similar appliances
supporting real-time interactive video.
7 Streaming Video Specify this application type for dedicated video
conferencing and other similar appliances
supporting real-time interactive video.
8 Video Signaling Specify this application type only if video control
packets use a separate network policy than video
data.
9–255 Reserved —
Figure 72. LLDP-MED Policies TLV
Configure LLDP
Configuring LLDP is a two-step process.
1. Enable LLDP globally.
2. Advertise TLVs out of an interface.
Related Configuration Tasks
• Viewing the LLDP Configuration
• Viewing Information Advertised by Adjacent LLDP Agents
• Configuring LLDPDU Intervals
• Configuring Transmit and Receive Mode
Link Layer Discovery Protocol (LLDP)
515