Reference Guide

CONFIGURATION mode
7. Assign the DCB policy to the DCB buffer threshold profile on interfaces. This setting takes
precedence over the default buffer-threshold setting.
INTERFACE mode (conf-if-te)
dcb-policy buffer-threshold buffer-threshold
Sample DCB Configuration
The following shows examples of using PFC and ETS to manage your data center traffic.
In the following example:
• Incoming SAN traffic is configured for priority-based flow control.
• Outbound LAN, IPC, and SAN traffic is mapped into three ETS priority groups and configured for
enhanced traffic selection (bandwidth allocation and scheduling).
• One lossless queue is used.
282
Data Center Bridging (DCB)