Users Guide

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.12.0 Introduced on the S4810.

7.8.1.0 Introduced.

net

To congure an IS-IS network entity title (NET) for a routing process, use this mandatory command. If you did not congure a NET, the IS-

IS process does not start.

Syntax

net network-entity-title

To remove a net, use the no net network-entity-title command.

Parameters

network-entity-title Specify the area address and system ID for an IS-IS routing process. The rst 1 to 13

bytes identify the area address. The next 6 bytes identify the system ID. The last 1 byte is

the selector byte, always identied as zero zero (00). This argument can be applied to an

address or a name.

Defaults Not congured.

Command Modes ROUTER ISIS

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.