Users Guide

Version Description
8.4.2.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series.
Example
Example (Manual
Proles)
Dell# show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
Dell#
Related Commands
• cam-acl — congure CAM proles to support IPv6 ACLs.
show ipv6 accounting access-list
View the IPv6 access-lists created on the E-Series and the sequence of lters.
Syntax
show ipv6 accounting access-list [access-list-name [cam_count | interface
interface {in | out}]
Parameters
access-list-name Enter the name of the ACL to be displayed, up to 140 characters.
cam_count List the count of the CAM rules for this ACL.
interface interface Enter the keyword interface followed by the interface type and slot/port or number
information:
• For a Port Channel interface, enter the keywords port-channel followed by a
number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series, the
range is 1 to 255 for TeraScale and 1 to 512 for ExaScale.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the
slot/port information.
• For a 25-Gigabit interface, enter the keyword twentyfiveGigE then the slot/port/
subport information.
• For a 50-Gigabit interface, enter the keyword fiftyGigE then the slot/port/
subport information.
IPv6 Access Control Lists (IPv6 ACLs) 741