Users Guide

boot flash 3.23.2.0 Control Processor passed
BOOTSEL IMAGE INFORMATION :
-----------------------------------------------------
Type Version Target checksum
boot selector 3.23.0.2 Control Processor passed
FPGA IMAGE INFORMATION :
-------------------------------------------
Card FPGA Name Version
stack-unit 1 Z9100-ON CPLD 1 3
stack-unit 1 Z9100-ON CPLD 2 2
stack-unit 1 Z9100-ON CPLD 3 2
stack-unit 1 Z9100-ON CPLD 4 2
stack-unit 1 Z9100-ON MSS FPGA 0.15
stack-unit 1 Z9100-ON MSS IAP 1.43
stack-unit 1 Z9100-ON OOB-FPGA 0.7
Dell#
Usage Information
NOTE: A lepath that contains a dot ( . ) is not
supported.
show running-cong
Display the current conguration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status] [compressed]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) conguration, enter one of the
following keywords:
NOTE: If you did not congure anything that entity, nothing displays and the
prompt returns.
aaa
for the current AAA conguration
acl
for the current ACL conguration
arp
for the current static ARP conguration
as-path
for the current AS-path conguration
bfd
for the current BFD conguration
bgp
for the current BGP conguration
boot
for the current boot conguration
cam-profile
for the current CAM prole in the conguration
class-map
for the current class-map conguration
community-
list
for the current community-list conguration
ecmp-group
for the current ECMP group conguration
eis
for the current EIS conguration
ethernet
for the current Ethernet CFM conguration
fefd
for the current FEFD conguration
ftp
for the current FTP conguration
frrp
for the current FRRP conguration
70 File Management