Users Guide

Dell(config)# interface range macro test
Dell(config-if-range-hu-1/1-1/3,hu-1/7-1/17,hu-1/19-1/22)#
Related Commands
• interface range – congure a range of command (bulk conguration).
• interface range macro name – run an interface range macro.
interface range macro name
Run the interface-range macro to automatically congure the pre-dened range of interfaces.
Syntax
interface range macro name
Parameters
name Enter the name of an existing macro.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced
Example (Single
Range)
This example shows the macro named test that was dened earlier.
Dell(config)# interface range macro test
Dell(config-if-range-te-1/1/1-1/1/3,te-1/3/1-1/4/4,te-1/11/1-1/22/1)#
Dell
Related Commands
• interface range — congure a range of command (bulk conguration).
• interface range macro (dene) — dene a macro for an interface range (bulk conguration).
608 Interfaces