Users Guide

RX - Fragment Counter 0
RX - VLAN Tagged Packets 0
RX - Ingress Dropped Packet 0
RX - MTU Check Error Frame Counter 0
RX - PFC Frame Priority 0 0
RX - PFC Frame Priority 1 0
RX - PFC Frame Priority 2 0
RX - PFC Frame Priority 3 0
RX - PFC Frame Priority 4 0
RX - PFC Frame Priority 5 0
RX - PFC Frame Priority 6 0
RX - PFC Frame Priority 7 0
RX - Debug Counter 0 0
RX - Debug Counter 1 0
RX - Debug Counter 2 0
<output truncated for brevity>
show hardware system-ow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow stack-unit id port-set number [counters | pipeline
pipeline-number]
Parameters
stack-unit id Enter the keywords stack-unit to select a stack member ID.
port-set number
[counters | pipeline
pipeline-number]
Enter the keywords port-set with a port-pipe number.
(OPTIONAL) Enter the keyword counters for the specied port-pipe.
Enter the keyword pipeline to display entries specic to a pipeline.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Example
Dell# show hardware system-flow stack-unit 1 port-set 0 counters
-------------------------------------------------------------------------------
EntryId Description #HITS for Pipeline: 0
-------------------------------------------------------------------------------
3067 STP BPDU Redirects 0
3065 LLDP BPDU Redirects 0
3063 LACP traffic Redirects 0
3062 GVRP traffic Redirects 0
472 Debugging and Diagnostics