Users Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
Version 9.3(0.0) Introduced on the S6000 platform.
Usage Information The following table describes the elds in the output of the show command:
Table 1. Show Output Fields
Field Description
Buer Stats for Interface interface-number Queue
queue-number
Displays the counters that are calculated by the buer
statistics tracking method for each port per queue on
a particular stack member.
Max Shared Limit Maximum shared buer space allotted to the specic
port for the corresponding stack unit
Default Packet Buer allocate for the queue The default packet buer size in KB that is associated
with the particular queue
Used Packet Buer Shared buer space that is in use by the packets
Example displaying
buer information
for specied queue
Dell# show hardware buffer interface hundredGigE 1/10 queue 0 buffer-info
----- Buffer Stats for Interface Hu 1/10 Queue 0 -----
Maximum Shared Limit: 11158
Default Packet Buffer allocated for the Queue: 0
Used Packet Buffer: 0
Example displaying
buer information
for specied priority-
group
Dell# show hardware buffer interface hundredGigE 1/10 priority-group 0 buffer-
info
----- Buffer stats for unit: 0 port: 34 (interface Hu 1/10) -----
------------------------------------------------------------------------
PG# PRIORITIES ALLOTED (CELLS) COUNTER (CELLS)
MIN SHARED MODE HDRM MIN SHARED HDRM
------------------------------------------------------------------------
0 0 0 17384 DYNAMIC 174 0 0 0
show hardware buer-stats-snapshot
Displays buer statistics tracking resource information for a specic interface.
Syntax
show hardware buffer-stats-snapshot resource interface interface {{priority-
group {id | all} | queue ucast {id | all} mcast {id | all} | all} [detail]}
Parameters
interface interface
Enter any of the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
slot/port/subport information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port/subport information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the slot/
port/subport information.
466 Debugging and Diagnostics