Users Guide

Command History
Version Description
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
Example
Dell#show hardware pfc-nodrop-priority l2-dlf drops stack-unit 0 port-set 0
---------------------------------------------------
Priority DropCount
---------------------------------------------------
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
Related Commands pfc-nodrop-priority l2-dlf drop — congures to drop the unknown unicast packets ooding on lossless priorities.
show interface pfc
Displays the PFC conguration applied to ingress trac on an interface, including priorities and link delay.
Syntax
show interface port-type slot/port[/subport] pfc {summary | statistics | detail
| buffer-threshold}
Parameters
port-type slot/
port[/subport] pfc
Enter the port-type slot and port PFC information. Enter the subport number if a 40G
port is fanned-out into 10G ports.
{summary |
statistics | detail |
buer-threshold}
Enter the keyword summary for a summary list of results or enter the keyword detail
for a full list of results. Enter the keyword statistics to view pfc statistics. Use the
keyword
buffer-threshold to display the buer threshold details.
NOTE: This command also enables you to view information corresponding to a range of ports. However,
for Open Networking (ON) platforms the notation for specifying port range in the command is dierent
from how you specify in non-ON platforms.
• For non-ON platforms, you can specify multiple ports as slot/port-range. For example, if you want to
display information corresponding to all ports between 1 and 4, specify the port range as show interfaces
interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/[subport] - slot/port/
[subport]. For example, if you want to display information corresponding to all ports between 1 and 4,
specify the port range as show interfaces interface-type 1/1/1 - 1/1/4.
Command Modes
EXEC Privilege
CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.9(0.0) Added support to display the interface congurations corresponding to a range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Data Center Bridging (DCB) 427