Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch Z9100-ON

301

302

303

304

305

306

307

308

309

310

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

Usage Information Route reection to clients is not necessary if all client routers are fully meshed.

Related Commands

• bgp cluster-id — assign an ID to a BGP cluster with two or more route reectors.

• neighbor route-reector-client — congure a route reector and clients.

bgp cluster-id

Assign a cluster ID to a BGP cluster with more than one route reector.

Syntax

bgp cluster-id {ip-address | number}

To delete a cluster ID, use the no bgp cluster-id {ip-address | number} command.

Parameters

ip-address Enter an IP address as the route reector cluster ID.

number Enter a route reector cluster ID as a number from 1 to 4294967295.

Defaults Not congured.

Command Modes ROUTER BGP

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.