Users Guide

Interface Priority Discard State Discard State Clear Count
Count forced No rxPfc
-----------------------------------------------------------------------
Te 0/0 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/1 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Te 0/2 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/3 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/4 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/5 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/80 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Dell#
show storm-control broadcast
Display the storm control broadcast conguration.
Syntax
show storm-control broadcast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the interface-specic storm
control conguration:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
slot/port/subport information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port/subport information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the slot/
port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
slot/port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
Storm Control 1423