Users Guide
Parameters
ip-address Specify the IP address in dotted decimal format of the address to summarize.
mask Specify the mask in dotted decimal format of the address to summarize.
not-advertise (OPTIONAL) Enter the keywords not-advertise to suppress that match the network
prex/mask pair.
tag tag-value (OPTIONAL) Enter the keyword tag then a value to match on routes redistributed
through a route map. The range is from 0 to 4294967295.
Defaults Not congured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.1 Introduced on the E-Series.
Usage Information
The area range command summarizes routes for the dierent areas.
With the not-advertise parameter congured, you can use this command to lter out some external routes.
For example, if you want to redistribute static routes to OSPF, but you don't want OSPF to advertise routes with
prex 1.1.0.0, you can congure the summary-address 1.1.0.0 255.255.0.0 not-advertise to lter out all the routes fall
in range 1.1.0.0/16.
Related Commands
• area range — summarize routes within an area.
1040 Open Shortest Path First (OSPFv2 and OSPFv3)