Install Guide

To select an entry, use the up and down arrow keys. Press Enter to select an OS or enter e to edit the commands before booting. Enter c

for a command line. The selected entry runs automatically in the operating system.

NOTE: These output examples are for reference only; your output may be dierent.

Grub bootloader example

GNU GRUB version 2.02~beta2+e4a1fe391

+--------------------------------------------+

|*ONIE: Install OS |

| ONIE: Rescue |

| ONIE: Uninstall OS |

| ONIE: Update ONIE |

| ONIE: Embed ONIE |

| ONIE: Diag ONIE |

| |

+--------------------------------------------+

Your system comes with ONIE installed.

ONIE example

ONIE: Install OS

For downloading and installing an OS from a URL

Starts ONIE with ONIE Discovery Service

(factory default boot)

ONIE: Rescue

Starts ONIE without ONIE Discovery Service

Useful for running Diagnostics manually

ONIE: Uninstall OS

Restore to factory defaults erases any installed OS

ONIE: Update ONIE

For downloading and updating ONIE from a URL

ONIE: Embed ONIE

For downloading and updating ONIE from a URL and erases any installed OS

ONIE: Diag ONIE

Run Diagnostic package for S6100-ON

During the initial setup, the system boots to ONIE Install. ONIE Install boots with ONIE Discovery to the console—ONIE:.

ONIE service discovery

ONIE attempts to locate the installer through several discovery methods, as shown. To download and run an installer, the ONIE Service

Discovery feature uses the rst successful method found.

1 Search locally attached storage devices for one of the ONIE default installer lenames—for example, the lename is: onie self

update

from the USB.

2 Query to the IPv4 and IPv6 link-local neighbors using HTTP for an installer.

3 Discover TFTP-based image from the DHCP server.

ONIE ifconfig eth0 command examples

If none of the ONIE Service Discovery methods are successful, you can disable this using the onie-discovery-stop command.

Management ports