Users Guide

Usage Information
To remove all congured debug commands for BGP, enter the no debug ip bgp command.
debug ip bgp notications
Allows you to view information about BGP notications received from neighbors.
Syntax
debug ip bgp [A.B.C.D | X:X:X:X::X | peer-group peer-group-name] notifications
[in | out]
To disable debugging, use the no debug ip bgp [A.B.C.D | X:X:X:X::X | peer-group peer-
group-name] notifications [in | out] command.
Parameters
A.B.C.D (OPTIONAL) Enter the IPv4 address of the neighbor.
X:X:X:X::X (OPTIONAL) Enter an IPv6 address.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group then the name of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notications received from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP notications sent to neighbors
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added ipv6 support.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
To remove all congured debug commands for BGP, enter the no debug ip bgp command.
Border Gateway Protocol 371