Users Guide

IS-IS: Level-1 LSPs sourced (new/refresh) : 0/0
IS-IS: Level-2 LSPs sourced (new/refresh) : 1/3
IS-IS: Level-1 LSPs flooded (sent/rcvd) : 0/0
IS-IS: Level-2 LSPs flooded (sent/rcvd) : 5934/5217
IS-IS: Level-1 LSPs CSNPs (sent/rcvd) : 0/0
IS-IS: Level-2 LSPs CSNPs (sent/rcvd) : 472/238
IS-IS: Level-1 LSPs PSNPs (sent/rcvd) : 0/0
IS-IS: Level-2 LSPs PSNPs (sent/rcvd) : 10/337
IS-IS: Level-1 DR Elections : 4
IS-IS: Level-2 DR Elections : 4
IS-IS: Level-1 SPF Calculations : 0
IS-IS: Level-2 SPF Calculations : 389
IS-IS: LSP checksum errors received : 0
IS-IS: LSP authentication failures : 0
Dell#
spf-interval
Specify the minimum interval between shortest path first (SPF) calculations.
Syntax
spf-interval [level-l | level-2] interval seconds [initial_wait_interval
seconds [second_wait_interval seconds]]
To restore default values, use the no spf-interval [level-l | level-2] interval
seconds [initial_wait_interval seconds [second_wait_interval seconds]]
command.
Parameters
level-l (OPTIONAL) Enter the keyword level-1 to apply the configuration to Level-1
SPF calculations.
level-2 (OPTIONAL) Enter the keyword level-2 to apply the configuration to Level-2
SPF calculations.
interval seconds Enter the maximum number of seconds between SPF calculations. The range is
from 0 to 120 seconds. The default is 10 seconds.
initial_wait_inter
val seconds
(OPTIONAL) Enter the initial wait time, in seconds, before running the first SPF
calculations. The range is from 0 to 120 seconds. The default is 5 seconds.
second_wait_inte
rval seconds
(OPTIONAL) Enter the wait interval, in seconds, between the first and second SPF
calculations. The range is from 0 to 120 seconds. The default is 5 seconds.
Defaults See Parameters.
Command Modes
● ROUTER ISIS (for IPv4)
● CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Intermediate System to Intermediate System (IS-IS) 749