Users Guide

Viewing the Available Flash Memory Size
• To view the available flash memory using SNMP, use the following command.
snmpget -v2c -c public 192.168.60.120 .1.3.6.1.4.1.6027.3.10.1.2.9.1.6.1
enterprises.6027.3.10.1.2.9.1.5.1 = Gauge32: 24
The output above displays that 24% of the flash memory is used.
MIB Support to Display the Software
Core Files Generated by the System
Dell Networking provides MIB objects to display the software core files generated by the system. The
chSysSwCoresTable contains the list of software core files generated by the system. The following table lists
the related MIB objects.
Table 85. MIB Objects for Displaying the Software Core Files Generated by the System
MIB Object OID Description
chSysSwCoresTable 1.3.6.1.4.1.6027.3.10.1.2.10 This is the table that contains the
list of software core files generated
by the system.
chSysCoresEntry 1.3.6.1.4.1.6027.3.10.1.2.10.1 Entry number.
chSysCoresInstance 1.3.6.1.4.1.6027.3.10.1.2.10.1.1 Stores the indexed information
about the available software core
files.
chSysCoresFileName 1.3.6.1.4.1.6027.3.10.1.2.10.1.2 Contains the core file names and
the file paths.
chSysCoresTimeCreated 1.3.6.1.4.1.6027.3.10.1.2.10.1.3 Contains the time at which core
files are created.
chSysCoresStackUnitNumber 1.3.6.1.4.1.6027.3.10.1.2.10.1.4 Contains information that includes
which stack unit or processor the
core file was originated from.
chSysCoresProcess 1.3.6.1.4.1.6027.3.10.1.2.10.1.5 Contains information that includes
the process names that generated
each core file.
Simple Network Management Protocol (SNMP) 932