Users Guide

!
monitor session 0
source TenGigabitEthernet 1/1/1 destination TenGigabitEthernet 1/2/1 direction rx
Dell(conf-mon-sess-0)#
Dell(conf-mon-sess-0)#do show monitor session
SessID Source Destination Dir Mode Source IP Dest IP
------ ------ ------------ --- ---- --------- --------
0 Te 1/1/1 Te 1/2/1 rx Port N/A N/A
Dell(conf)#monitor session 0
Dell(conf-mon-sess-0)#source po 10 dest ten 1/2/1 dir rx
Dell(conf-mon-sess-0)#do show monitor session
SessID Source Destination Dir Mode Source IP Dest IP
------ ------ ----------- --- ---- --------- --------
0 Te 1/1/1 Te 1/2/1 rx Port N/A N/A
0 Po 10 Te 1/2/1 rx Port N/A N/A
Dell(conf)#monitor session 1
Dell(conf-mon-sess-1)#source vl 40 dest ten 1/3/1 dir rx
Dell(conf-mon-sess-1)#flow-based enable
Dell(conf-mon-sess-1)#exit
Dell(conf)#do show monitor session
SessID Source Destination Dir Mode Source IP Dest IP
------ ------ ----------- --- ---- --------- --------
0 Te 1/1/1 Te 1/2/1 rx Port N/A N/A
0 Po 10 Te 1/2/1 rx Port N/A N/A
1 Vl 40 Te 1/3/1 rx Flow N/A N/A
NOTE: Source as VLAN is achieved via Flow based mirroring. Please refer section
Enabling Flow-Based Monitoring.
Port Monitoring 739