Users Guide

The default is 2 seconds.
3 Change the max-age parameter.
PROTOCOL MSTP mode
max-age seconds
The range is from 6 to 40.
The default is 20 seconds.
4 Change the max-hops parameter.
PROTOCOL MSTP mode
max-hops number
The range is from 1 to 40.
The default is 20.
Example of the forward-delay Parameter
To view the current values for MSTP parameters, use the show running-config spanning-tree mstp
command from EXEC privilege mode.
Dell(conf-mstp)#forward-delay 16
Dell(conf-mstp)#exit
Dell(conf)#do show running-config spanning-tree mstp
!
protocol spanning-tree mstp
no disable
name my-mstp-region
MSTI 1 VLAN 100
MSTI 2 VLAN 200-300
forward-delay 16
MSTI 2 bridge-priority 4096
Dell(conf)#
Modifying the Interface Parameters
You can adjust two interface parameters to increase or decrease the probability that a port becomes a
forwarding port.
• Port cost is a value that is based on the interface type. The greater the port cost, the less likely the port
is selected to be a forwarding port.
• Port priority influences the likelihood that a port is selected to be a forwarding port in case that several
ports have the same port cost.
The following lists the default values for port cost by interface.
Multiple Spanning Tree Protocol (MSTP) 635